Welcome to Tariku Metals, your trusted partner in Addis Ababa for high-quality aluminium solutions. We take pride in manufacturing and supplying premium Aluminium 1070 Bar/Rods, crafted to meet the precise demands of Ethiopia’s growing industries. Our commitment is to provide not just a product, but a reliable foundation for your projects, combining local expertise with international standards to support builders, fabricators, and innovators across the nation with consistent, readily available material.
This particular alloy is composed of at least 99.7% pure aluminium, making it one of the most commercially pure grades available. This high purity gives the bar and rods excellent corrosion resistance and high electrical conductivity. While it’s a softer metal with good formability, its strength is moderate, which makes it exceptionally easy to work with using standard machining and welding techniques for a wide range of fabrication needs.
| Bar Wire Standard | ASTM B221, B211, B565, B316, AMS 4121 2014 |
| Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| Rolled Flat Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Stainless Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Grade | Fe | Si | Mg | Mn | Cu | Zn | Ti | Al |
| Aluminium 1070 | 0.25 | 0.2 | 0.03 | 0.03 | 0.03 | 0.07 | 0.03 | 99.70 |
| Grade | Density (×1000 kg/m3) | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | Reduction in Area (%) |
| Aluminium 1070 | 7.7-8.03 | 640 | 495 | 10 | 45 |
| STANDARD | WERKSTOFF NR. | UNS |
| Aluminium 1070 | 3.0275 | A91070 |
Yes, Aluminum 1070 bars are corrosion-resistant due to their high purity, offering good resistance to atmospheric and chemical corrosion. However, they may be less resistant than alloyed aluminum grades.
Aluminum 1070 rods are typically sized by diameter, ranging from small diameters like 6mm to larger sizes of up to 150mm or more, with lengths commonly ranging from 1 to 6 meters.
To maintain Stainless Aluminium 1070 Bar, clean it regularly with mild detergent and water, avoid harsh chemicals, inspect for corrosion or scratches, and ensure proper storage to prevent physical damage.
The excellent workability and conductivity of these 1070 bars and rods make them ideal for electrical applications, such as busbars and conductors, where efficient current flow is essential. They are also widely used in general fabrication for chemical equipment, reflectors, and decorative trims. Their resistance to corrosion is a key advantage for architectural uses and in industries where components need to withstand harsh environments without the need for heavy-duty structural strength.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Tariku Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Addis Ababa, Ethiopia
Copyright 2024 Tariku Metals. All rights reserved
